WodKan Tech · weekly review · 2026-11-05
Fiber Optics on the Trail of Leaks and a Costly Lesson from Winnipeg
This week the water and wastewater industry shows two faces of progress: on one hand, the clever use of existing telecom infrastructure to fight leaks, and on the other, a reminder that even the most automated treatment plant is only as good as its alarm system. Let's look at what happened and what we can learn from it.
Water leaks tracked down by Openreach's fiber-optic network
British operator Portsmouth Water has gone a step further than standard acoustic leak sensors — instead of installing new measurement infrastructure, it has turned to what's already in the ground. The company has partnered with Lightsonic to use Openreach's existing fiber-optic network for leak detection using the Distributed Acoustic Sensing (DAS) method [1].
The idea is simple, though the result is anything but: a fiber-optic cable that normally carries internet traffic doubles as a giant acoustic sensor. The technology analyzes the characteristic sounds generated by water leaking underground and pinpoints the fault to within 10 metres. According to the announcement, this method can detect up to four times more leaks than traditional approaches [1].
The rollout at Portsmouth Water is set to launch in December 2026, but the company isn't a pioneer — Thames Water, Affinity Water and Southern Water have already signed similar agreements with Lightsonic [1]. This signals that water network operators are increasingly looking for synergies with telecom infrastructure rather than investing in costly, dedicated sensor networks. For automation and metering system vendors, this is an interesting trend to watch — especially in cities where fiber-optic and water networks often run along the same routes.
When the alarm fails: 10 million litres of sewage into the Red River
While the Portsmouth Water story shows how technology can prevent water losses, the case from Winnipeg, Canada, is a stark reminder of what happens when automation fails. At the North End Water Pollution Control Centre, two automatic bypass gates opened unexpectedly [2].
The result? Over two and a half hours, roughly 9.8 million litres of untreated sewage flowed into the Red River [2]. What's particularly concerning is that the system meant to immediately alert operators when the gates opened simply didn't work. The city is now investigating to determine exactly what went wrong in the automation system [2].
This incident is a case study that should land on the desk of every automation engineer working with municipal infrastructure. It shows that a single point of failure — in this case, an alarm that was supposed to be the "safety net" for the rest of the system — can have consequences measured in millions of litres of discharge and months of investigation. In an era of increasingly automated treatment plants, redundancy in alarm systems and regular testing of their effectiveness are no longer a "nice to have" — they are an absolute necessity.
Two sides of the same automation coin
Taken together, these two stories illustrate well where the water and wastewater industry stands today. On one hand, the smart use of existing infrastructure and data to catch problems before they become costly — as in the case of the UK leaks. On the other, a reminder that every automation system, no matter how advanced, needs oversight, testing and contingency plans for when things go wrong — as in Winnipeg.
This tension between innovation and reliability will be one of the key topics of conversation in the coming months — and it's exactly what we want to discuss live.
See you at WodKan-Tech 2027?
The topic of network monitoring, alarm systems and treatment plant automation will be one of the pillars of the upcoming Water and Wastewater Technology and Equipment Fair — WodKan-Tech 2027. It's a chance to compare leak detection solutions in person, ask automation vendors about alarm system redundancy, and see how the industry is responding to the challenges outlined in this review. Save the date — see you there!
Footnotes
[2] CTV News Winnipeg — https://www.ctvnews.ca/winnipeg/article/roughly-98-million-litres-of-sewage-spill-from-winnipeg-water-treatment-plant/
This review was prepared by the Ptak Warsaw Expo editorial team.